Wheel Bearings?

[Mike9300]

Does a slave cylinder matter on what type of transmission you have or are they all the same?

I dont think so, the throw of the clutch shaft is the same
when i order my slave cyl only one choice (well ok few colors) so should not matter

BUT
Buggy man has proved me wrong many times before so please wait for him to confirm

 

[Kimbo]

I may be completely wrong, but I don't believe bugs ever came with hydraulic clutches as standard, therefore there is no relationship between the slave and the trans.


(And just to make you laugh, I've just spent 15 mins writing a whole bunch of drivel about "brake" slaves, trans and years of manufacture, until I saw the pics and realised you were asking about clutch slaves..... doh  )

[buggyman]

 

Does a slave cylinder matter on what type of transmission you have or are they all the same?

I may be completely wrong, but I don't believe bugs never came with hydraulic clutches as standard, therefore there is no relationship between the slave and the trans.


(And just to make you laugh, I've just spent 15 mins writing a whole bunch of drivel about "brake" slaves, trans and years of manufacture, until I saw the pics and realised you were asking about clutch slaves..... doh  )

Spot on Kimbo ,unless you're thinking of adapting a Vanagon "pusher" slave to a Type1 trans B B ,that proves to be problematic since the crossshafts are a different diameter:
http://www.thesamba.com/vw/forum/viewtopic.php?t=471252
from
http://www.google.com/search?um=1&hl=en&q=vw%20vanagon%20clutch%20slave%20cylinder%20on%20a%20type%201&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1280&bih=806&wrapid=tlif134319080685631&ie=UTF-8&sa=N&tab=iw&ei=KXcPUJWhB8WFiALwvYCYDw#hl=en&sugexp=cqn%2Ccconf%3D1.0%2Cmin_length%3D2%2Crate_low%3D0.025%2Crate_high%3D0.025%2Csecond_pass%3Dfalse%2Cnum_suggestions%3D2%2Cignore_bad_origquery%3Dtrue&gs_nf=1&cp=43&gs_mss=adapting%20a%20vw%20vanagon%20clutch%20slave%20cylinder%20on%20a%20type%201&pq=vw%20vanagon%20clutch%20slave%20cylinder%20on%20a%20type%201&gs_id=v&xhr=t&q=adapting+a+vw+vanagon+clutch+slave+cylinder+on+a+type+1&pf=p&sclient=psy-ab&oq=adapting+a+vw+vanagon+clutch+slave+cylinder+on+a+type+1&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=65e91568fd6db16e&biw=1280&bih=806

http://www.google.com/search?hl=en&q=vw+vanagon+clutch+slave+cylinder&bav=on.2,or.r_gc.r_pw.,cf.osb&biw=1280&bih=806&wrapid=tlif134318570824410&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=ZmMPUKKKFO_qiwL8i4CgCg#um=1&hl=en&tbm=isch&sa=1&q=vw+vanagon+clutch+slave+cylinder+on+a+type+1&oq=vw+vanagon+clutch+slave+cylinder+on+a+type+1&gs_l=img.12...1369669.1414995.2.1419241.41.27.0.0.0.0.1102.17943.5-20j5j2.27.0...0.0...1c._FwWrboWG6Y&fp=1&biw=1280&bih=806&bav=on.2,or.r_gc.r_pw.,cf.osb&cad=b&sei=n4IPULqcAcTciQLepYHYCA

http://www.google.com/search?num=10&hl=en&site=imghp&tbm=isch&source=hp&biw=1280&bih=806&q=vw+vanagon+clutch+cross+shaft+compared+to+a+type+1+cross+shaft&oq=vw+vanagon+clutch+cross+shaft+compared+to+a+type+1+cross+shaft&gs_l=img.12...9694.9694.0.11947.1.1.0.0.0.0.190.190.0j1.1.0...0.0...1ac.vS27LfRQNRE

http://www.google.com/search?num=10&hl=en&site=imghp&tbm=isch&source=hp&biw=1280&bih=806&q=vw+vanagon+clutch+lever&oq=vw+vanagon+clutch+lever&gs_l=img.12...4076.4076.0.6049.1.1.0.0.0.0.200.200.2-1.1.0...0.0...1ac.-tyapG-L9lM

Otherwise it's just a matter of making sure you have the correct type of mounting bracket for the type of Type1 slave you buy as madrider discovered http://www.chircoestore.com/catalog/smf/index.php?topic=5427.msg39401  .

Does a slave cylinder matter on what type of transmission you have or are they all the same?

Not sure on that Q. But Buggyman is on a roll this thread    The harder the Q's the better he likes it    I don't think there is a VW Q that he cannot answer (ok Buggyman don't let your head get too big) 

  Head's the same size as always Dragen
.